Control unit orchestrates the opening and closing cycle of three-phase synchronous door motors, maintaining smooth motion and consistent torque under demanding site conditions.
Galvanically isolated digital I/O keeps the controller interoperable with SHUL and UL lift control families.
Engineered for safe, adaptive door motion
The controller combines accurate rotor sensing, robust filtering, and layered protections to extend mechanical life while reducing commissioning time.
Integrated motion intelligence
An analog sine-cosine feedback loop keeps door speed and acceleration profiles repeatable, even with changing cabin loads.
Failsafe protections
Hardware shields short circuits and input surges, while software monitors current peaks, phase continuity, heatsink temperature, and DC link voltage.
Maintenance-ready platform
Open parameters, event monitoring, and a Bluetooth commissioning app let technicians adjust door performance without opening the controller cabinet.
Technical Profile
Controller Specifications
Electrical ratings, interfaces, and protection logic translate the controller into a reliable companion for modern lift sites.
;
Power supply;AC 220 V, 50 Hz
Permissible output current;Continuous 1 A, Peak 2.5 A
Compatible elevator controllers; SHUL series: SHULK, SHULM, SHULR. UL series: UL, UKL, UEL, SHLR, SHK6000.
Digital inputs;Controller interface: dry contacts, input current up to 12 mA at 24 V, 5 galvanically isolated inputs.
Photo barrier; Dry contact, output current up to 120 mA at 12 V, galvanically isolated.
Digital outputs;Dry contacts, input current up to 100 mA, max voltage 35 V DC per channel, 4 galvanically isolated outputs.
Rotor position sensor;Analog sine-cosine differential output, 0 to 5 V range.
Control buttons;Open, Close (2 buttons).
Indicators;LED HL1 green, LED HL2 red.
Hardware protections;Short circuit and overvoltage protection.
Software protections;Phase peak current, sustained phase overcurrent, heatsink overtemperature, DC link overvoltage, rotor sensor fault, motor phase loss.
Enclosure rating;IP20
Dimensions;Length x width x height (see installation drawing).
Weight;Up to 1.5 kg